Aerial Model 9

The-Aerial-Model-9-Loudspeaker-1

Aerial Model 9
USD$ 8,800

The Aerial Acoustics Model 9 presents itself with confidence. The subtle angularity of each slender loudspeaker column conveys an architectural spirit that is complemented by an astonishingly dynamic, forthright, and wonderfully full-range sound. The graceful, impeccably finished pillar of the Model 9 is ideally suited for listening environments where uncompromising performance and quality are essential and a refined, contemporary appearance is valued.

Together with its transparent, open, natural character, the Model 9 exhibits a particularly spacious sound field, with an excellent sense of depth and focus. Bass is taut, fully extended, and is communicated with power and authority. Upper frequencies are airy, clear, and remarkably smooth. Both music and film soundtracks are faithfully rendered with honesty, dynamic ease, and abundant detail.

All Aerial loudspeaker systems are designed and constructed with fanatical attention to quality and detail. Decades of design and manufacturing experience have taught us that craftsmanship and technology go hand-in-hand when creating products of uncompromising performance and genuine long-term value. World class manufacturing techniques and production equipment are employed, complemented by the work of skilled craftsmen when only experienced hands will do.

Aerial Acoustics. Every detail matters.

Frequency Response: 30Hz to 22kHz ±2dB, -6dB at 27Hz
Sensitivity: 90dB at 2.83 Vrms and 1.0 meter on axis
Impedance: 4Ω nominal, 3.2Ω minimum, low reactance
Power Requirements: 50 to 600 watts (8Ω rating) recommended
Woofers: Four 7.1″ (180mm) cast magnesium alloy frame drivers
Damped bilaminate composite cones
Large vented magnet structures with long-stroke coils
Midrange: 6″ (150mm) cast magnesium alloy frame driver
Damped bilaminate composite cone
Vented magnet structure with linear stroke coil
Tweeter: 1.0″ (25mm) precision titanium dome
Large magnet structure with deep rear chamber
Flared pole vent and 5 surrounding vents
Crossover: 350 Hz and 2.5kHz at 24dB per octave
Independent filter assemblies on glass-epoxy PCBs
High-purity copper wiring with Teflon™ insulation
Cabinet: Minimum resonance 1″ and 2″ MDF walls
Extensive internal bracing. Tongue and groove joints
Matched architectural veneers. High gloss finishes
Connections: Four gold-plated binding posts with copper jumpers
Bi-wire and bi-amp capable
Optional Bases: Laser-cut solid steel bases including stainless steel spikes,
machined hardware, and floor protectors
Dimensions HWD: 47.7 × 11.0 × 18.6″ (1210 × 280 × 473mm)
Weight Each: 120lbs (55kg) – 166lbs (75kg) packed